Gear Flow Divider

Model No-MTO (ALUMINIMUM HOUSING)

1. Available from 2 to 12 sections in two sizes.
2. Within each size there are different displacements. The dimensions of the sections vary with their displacement in the length of the housing.
3. The sections are executed with an internal connection and every second chamber has an inlet port.
4. We can offer two different executions:
Version A – is executed with an into the housing integrated combined pressure relief and suction valve.
Version G - is without this valve.

Model No-MTO (CAST IRON HOUSING)

1. Available from 2 to 12 sections in two sizes. Within each size there are different displacements. The dimensions of the sections vary with their displacement in the length of the housing.
2. We can offer two different executions:
Version EA – with in- and outlet blocks for end position compensation made from steel (EA9) or aluminum (EA7). The sectional inlet blocks are manufactured with an internal connection and variable usable inlet ports. The outlet blocks have integrated pressure relief valves for seondary loop protection, suction valves and measuring ports for each section.
Version G/S - is without blocks and valves.