1. Industrial fans help to convey pure air, steam, gases, dust or light cargo.
2. Our fans are known for their efficiency of up to 88% with low sound pressure levels, a small motor power within a large volume flow and high pressure as well as a good range of adjustment with stable characteristics.
3. The drive can either work directly via the motor respectively via a coupling with stock or via a belt drive with stock.
4. Precise balancing in 2 levels as well as a final inspection with inclusive vibration measurement is a normal standard for our fan deliveries.

• Types
  • 1. Pressure Resistant fans
    2. Stainless Steel fans
    3. Ex - proofed fans acc. ATEX
    4. Wear protected fans
    5. Quoted fans
    
• Material of Construction
  • Zinc coated-, heat-, corrosion-, acid- and non-ware special steel. Also possible to special equipment, e.g. shaft seal with seal gas connection, nekal-tight compensators, rubber coating, split housing, inlet vane control etc.
    
• Volume Flow
  • 1. single side suction - 110 m³/h to 1,900,000 m³/h.
    2. double side suction - upto 3,800,000 m³/h.
    
• Pressure
  • 1. single stage - upto 330 mbar
    2. double stage - upto 560 mbar
    
• Tip Speed
  • 280 m/s possible
• Temperature
  • 39 °C to 650 °C
• Drive power
  • 0,37 kW to 6,000 kW
• Application
  • 1. Dedusting
    2. Exhausting
    3. Airconditoning and Ventilation
    4. Dryer
    5. Hotgas recirculation
    6. Pneumatical conveying
    7. Blow - boxes
    8. Exhaust cleaning
    9. Heat recovery
    10. Induced draft fans
    11. Gas transport
    

Remark :

For Special purposes the fans can be constructed tailor-made, according to customer's requirement.